Initial commissioning
21
Water hardness
The display changes to the screen for
setting the water hardness.
– The dishwasher must be pro-
grammed to the correct water hard-
ness for your area.
– Your local water authority will be able
to advise you of the water hardness
level in your area.
– Where the water hardness fluctuates,
e.g., between 10-16 gpg (10-15 °d),
always program the dishwasher to
the higher value (16 gpg in this exam-
ple).
It is useful to know your water hardness
so that you can provide the service
technician with this information in the
event of any service calls.
Enter the water hardness below:
____________ gpg
The dishwasher is programmed at the
factory for a water hardness level of
1 gpg (1 °d).
Use the
arrow buttons to select
the hardness of your water supply
and confirm with
OK
.
See “Settings menu, Water hardness”
for more information on setting the
water hardness.
Finally, the notes
Miele@home enabled
and
Set up complete
will appear in the
display.
After confirming these notes with
OK
,
the messages
Refill salt
and
Refill
rinse aid
may appear.
Add salt and rinse aid if necessary
(see “Before using for the first time –
Dishwasher salt” and “Rinse aid”).
Confirm the notes with
OK
.
The program selected will appear in the
display briefly and the indicator light for
the program selected will come on.
The display will then show the esti-
mated program duration for the pro-
gram selected.
These basic settings will be saved after
the dishwasher has been through one
complete program.
