Miele PG 8133 SCVi Operating Instructions Manual Download Page 20

Page: 20 / 96

Initial commissioning

Basic settings



Open the door.



Turn the dishwasher on with the



button.

The welcome screen will appear when
the dishwasher is turned on for the first
time.

Language

The display will change automatically to
the screen for setting the language.



Use the



arrow buttons to select

the language you want and also the
country, if appropriate, and confirm
your selection with

See “Display functions” for more infor-
mation about the display and controls.

A check



will appear next to the lan-

guage that has been set.

Time of day

The display will then change to the
screen for setting the time.

The current time of day must be set be-
fore you can use the “FlexiTimer” pro-
gramming option.



Use the



arrow buttons to set the

hour and confirm with



Then set the minutes and confirm
with

Keeping the



arrow buttons

pressed will increase or decrease the
time automatically.

Summary of Contents for PG 8133 SCVi

































































































Search results

Summary of Contents for PG 8133 SCVi

Reviews:

Related manuals for PG 8133 SCVi

Brands by name

Popular brands

Miele PG 8133 SCVi, Operating Instructions Manual

Search results

Summary of Contents for PG 8133 SCVi

Reviews:

Related manuals for PG 8133 SCVi

Brands by name

Popular brands