Miele PG 8133 SCVi Operating Instructions Manual Download Page 19

Page: 19 / 96

Initial commissioning

Opening the door

At the end of programs with a drying
phase (see “Program guide”), the door
will open automatically a little in order to
help the drying process.
This function can be deactivated, if pre-
ferred (see “Settings, AutoOpen”).



Pull the handle to open the door.



Open the door completely to re-en-
gage the door closing mechanism.

If the door is opened during operation,
all functions are automatically inter-
rupted.



Water in the dishwasher may be

hot. Danger of scalding!
Only open the door during operation
if absolutely necessary and exercise
extreme caution when doing so.



Keep the area around the door

free of obstructions.

Closing the door



Push the baskets in.



Then lift the door upwards and push
until it clicks into position.



Danger of crushing injuries!

Do not put your hand inside the door
as it is closing.

Summary of Contents for PG 8133 SCVi

































































































Search results

Summary of Contents for PG 8133 SCVi

Reviews:

Related manuals for PG 8133 SCVi

Brands by name

Popular brands

Miele PG 8133 SCVi, Operating Instructions Manual

Search results

Summary of Contents for PG 8133 SCVi

Reviews:

Related manuals for PG 8133 SCVi

Brands by name

Popular brands