Before using for the first time
24
Filling the salt reservoir
Important! Before filling the salt
reservoir for the first time, you must
fill it with approx. 2 litres of water to
enable the salt to dissolve.
Once the dishwasher has been used,
there is always sufficient water in the
reservoir.
Remove the lower basket and un-
screw the salt reservoir cap.
Water or saline solution will run out
of the reservoir when the cap is re-
moved.
It should therefore only be removed
in order to refill the salt reservoir.
Fill the reservoir with approx. 2 litres
of water (first use only).
Place the funnel provided over the
salt reservoir and carefully fill with
dishwasher salt until the reservoir is
full. The salt reservoir holds approx.
2 kg of salt, depending on the type of
salt used.
Clean any excess salt from around
the reservoir opening and then screw
the cap on again firmly.
Run the
Cold pre-wash
programme
immediately without a load in order to
remove any traces of salt from the
cabinet.
Summary of Contents for PG 8131i
Page 39: ...Loading the dishwasher 39 Cutlery basket Heavily soiled items ...
Page 91: ......
