Miele PG 8131i Operating Instructions Manual Download Page 50

Page: 50 / 92

Programme options

Start at

With the

Start at

function, you set the

exact time you want the programme to
start at.



Use the



arrows to set the hour

and confirm with

The hours will be saved and the minute
number block will be highlighted.



Use the



arrows to set the

minutes and confirm with

The saved start time for the programme
selected will appear in the display.
The

Start

indicator light will come on.

When the set time is reached, the pro-
gramme selected will begin automatic-
ally.
The time remaining will appear in the
display, the



indicator will go out and

the

Start

indicator light will come on.

Finish at

With the

Finish at

function, you set the

latest time at which you wish the pro-
gramme to end.



Use the



arrows to set the hour

and confirm with

The hours will be saved and the minute
number block will be highlighted.



Use the



arrows to set the

minutes and confirm with

The estimated start time for the pro-
gramme selected will appear in the dis-
play.
The

Start

indicator light will come on.

A message will appear in the display if
the programme cannot be completed
by the set finish time because it has too
long a running time.

The programme will start automatically
when the estimated start time is
reached.
The time remaining will appear in the
display, the



indicator will go out and

the

Start

indicator light will come on.

Summary of Contents for PG 8131i





























































































Search results

Summary of Contents for PG 8131i

Reviews:

Related manuals for PG 8131i

Brands by name

Popular brands

Miele PG 8131i, Operating Instructions Manual

Search results

Summary of Contents for PG 8131i

Reviews:

Related manuals for PG 8131i

Brands by name

Popular brands