Miele PG 8131i Operating Instructions Manual Download Page 80

Page: 80 / 92

Settings menu

Rinse aid

You can adjust the rinse aid dosage for
best results.
The dispenser can be set between 0
and 6 ml.
3 ml is set as standard.

The rinse aid dosage can turn out to be
higher than the set value due to the
automatic adjustment of the pro-
gramme.

If spots appear on crockery and glass-
ware:

– Increase the rinse aid dosage.

If clouding or smearing appears on
crockery and glassware:

– Decrease the rinse aid dosage.



Select the setting you want and con-
firm your choice with

External dispensing

Activate automatic dispensing of liquid
detergent if you have installed the op-
tional external dosing module.

The DOS module is supplied with its
own installation instructions.



Select the setting you want and con-
firm with

The setting will remain active until
you deactivate “External dispensing”.

When using liquid dispensing via a DOS
module, you can dispense the deter-
gent according to the detergent manu-
facturer's instructions as a percentage
or in millilitres per minute

Detergent quantity

The following functions will only be-
come visible when external dispens-
ing has been activated.

A detergent amount of 0.50 % is set as
standard. The dispensed quantity can
be modified between 0.1 and 2.00 % in
increments of 0.05 %.

Summary of Contents for PG 8131i





























































































Search results

Summary of Contents for PG 8131i

Reviews:

Related manuals for PG 8131i

Brands by name

Popular brands

Miele PG 8131i, Operating Instructions Manual

Search results

Summary of Contents for PG 8131i

Reviews:

Related manuals for PG 8131i

Brands by name

Popular brands