Miele PG 8131i Operating Instructions Manual Download Page 67

Page: 67 / 92

Problem solving guide

Problem

Cause and remedy

White residue is visible
on the dishware. Cloud-
ing occurs on glass-
ware and cutlery; film
can be wiped off.

The rinse aid dosage is set too low.



Increase the dosage (see “Settings menu, Rinse
aid”).

There is no salt in the salt reservoir.



Fill the salt reservoir (see “Before using for the first
time - Dishwasher salt”).

The salt reservoir cap has not been screwed on cor-
rectly.



Replace it, making sure that it screws back on cor-
rectly.

The water softener is programmed to too low a water
hardness level.



Programme the water softener to a higher water
hardness level (see “Settings menu, Water hard-
ness”).

There are rust stains on
cutlery.

A programme was not run after dishwasher salt was
added. Traces of salt have got into the wash cycle.



Always run the "



Cold pre-wash

programme after

refilling salt

The affected items are not corrosion resistant.



Purchase cutlery which is dishwasher-proof.

Summary of Contents for PG 8131i





























































































Search results

Summary of Contents for PG 8131i

Reviews:

Related manuals for PG 8131i

Brands by name

Popular brands

Miele PG 8131i, Operating Instructions Manual

Search results

Summary of Contents for PG 8131i

Reviews:

Related manuals for PG 8131i

Brands by name

Popular brands