Supervisor level
93
Time / Impulse
To be able to operate the tumble dryer
with conventional payment systems
where multiple coins can be inserted,
you can adjust how much time is
purchased each time a coin is
inserted.
A time of between 5 and 60 minutes
can be set in increments.
Factory setting: 30 minutes
F-back signal to pay system
Setting the feedback signal for the
payment system.
– Factory setting: Off
– At the end of the programme
The feedback signal is sent at the
end of the programme.
– Release of the start button
The feedback signal is sent when the
start button is released.
– Start and end of programme
The feedback signal is sent at the
start and end of the programme.
– Programme running
The feedback signal is sent
continuously from the start until the
end of the programme.
Payment system lock
To avoid tampering, a programme lock
can be set up in programme
operation. If the lock is applied, the
programme is interrupted and
payment credit is lost as soon as the
door is opened.
To offer the possibility to add laundry,
the time when the lock activates can be
adjusted.
– Factory setting: Off
– As soon as the programme starts
– 1 minute after the start of the
programme
– . . .
– 5 minutes after the start of the
programme
Clear paid signal
The “Paid” signal in coin mode can be
applied until the end of the
programme or discarded after
5 minutes if the programme has not
been started.
– Factory setting: Off
– On
