background image

4. Selecting programme settings

32

Selecting Extras

The drying programmes can be
supplemented with various Extras.

OK

Overview

not selected

Cottons

11:02

kg

Drying level

Extras

1:56h

Weight

Normal

8.0

Touch the 

Extras

 sensor.

11:02

Anti-crease

Extras

OK

Low
temperature

Touch the sensor for the Extra you
want.

Press 

OK

 when it is offered in the

display.

The relevant symbol for the required
Extra 

 or 

 will light up.

Not all Extras can be selected with
every programme, only with those for
which it makes sense.

Low temperature

Delicate fabrics (with the 

 symbol on

the care label, e.g. acrylic garments) are
dried at a lower temperature. The
programme duration is longer.

Anti-crease

After the programme has finished, the
drum can be set to continue to rotate in
a certain rhythm, depending on the
selected programme. This helps to
prevent creasing after the programme
has ended.

The anti-crease function is switched off
at the factory. It can be switched on in
the Supervisor level with a variable
duration of up to 12 hours.

Summary of Contents for PDR 908 EL

































































































Reviews: