Miele PDR 908 EL Operating And Installation Instructions Download Page 38

Page: 38 / 96

Programme chart

Express

Max. load 4 kg*

Extra dry, Normal plus, Normal, Hand iron plus, Hand iron, Machine iron

Items

Hard-wearing textiles suitable for the

Cottons

programme.

Notes

Shorter programme duration

Delicates

Max. load 4 kg*

Normal plus, Normal, Hand iron plus

Items

– Delicate items made of cotton, synthetic, or mixed fibre.

– Lightweight pullovers, dresses, trousers, overalls, table cloths,

shirts and blouses.

– Lingerie and appliquéd fabrics.

Notes

Less creasing occurs in this programme.

Notes

Reducing the load will further reduce creasing.

Shirts

Max. load 2 kg*

Normal, Hand iron plus

Items

Shirts and blouses.

Denim

Max. load 3.5 kg*

Normal, Hand iron plus

Items

Denim jackets, jeans, shirts, and skirts.

Woollens

Max. load 2 kg*

Items

Woollen garments and textiles containing wool blends, e.g.
pullovers, cardigans, stockings.

Notes

– Wool and wool blend items are only fluffed up; they are not dried

completely.

– Remove items as soon as the programme has finished and leave

to finish drying at room temperature.

Summary of Contents for PDR 908 EL

































































































Search results

Summary of Contents for PDR 908 EL

Reviews:

Related manuals for PDR 908 EL

Brands by name

Popular brands

Miele PDR 908 EL, Operating And Installation Instructions

Search results

Summary of Contents for PDR 908 EL

Reviews:

Related manuals for PDR 908 EL

Brands by name

Popular brands