Supervisor level
77
Clock display
After selecting the clock format, you
can set the time of day.
Clock format
– Factory setting: 24-hour display
– 12-hour display
–
No clock
Set
– The time can be set.
Date
The date can be set after selecting the
date format.
–
Date format
The date can be shown starting with
the day, month, or year.
–
Date
The date is set.
Volume
The volume for various signal tones
can be changed.
The volume can be changed.
–
Finish tone
–
Keypad tone
–
Welcome tone
–
Fault alarm
The acoustic signal that indicates a
fault can be switched off. The volume
cannot be changed for this.
Res. moisture display
In addition to displaying the drying
level, the residual moisture can also
be indicated as a percentage.
– Factory settings:
without percentage
value
–
with percentage value
Visibility parameters
Various parameters are offered/
displayed when a programme is
selected. You can decide which
parameters should not be displayed.
These parameters can then not be
edited during programme selection.
–
Residual moisture
–
Duration
–
Low temperature
–
Anti-crease
–
Load size
