Supervisor level
76
Peak load signal
External hardware is connected via the
Miele XCI box.
The peak-load negotiation function
enables the tumble dryer to be
connected to an energy management
system. When a signal is registered,
the tumble dryer's heater is switched
off for a short period or the appliance
is prevented from being switched on.
The tumble dryer may only be
operated with a peak-load system if
this system is connected to the tumble
dryer via the Miele XCI Box.
– Factory setting: No function
– Peak load with 230 V
– Peak load with 0 V
Peak load prevention
With this function, the application of a
hygiene programme is not amended
when a peak load signal is in place.
The heater stays switched on.
– Factory setting: Off
– On
External exhaust flap
External hardware is connected via the
Miele XCI box.
The time delay between the external
exhaust air flap's activation point and
the switch-on time for the drum/fan
motor is regulated.
A message appears in the display while
the exhaust air flap is open.
– Factory setting: Off
This option must always be selected
if there is no exhaust air flap to
activate. This prevents the
programme from being cancelled.
– On
- 0 seconds
- 1 second
- 2 seconds
...
- 300 seconds
