Supervisor level
73
Fault alarm
The acoustic signal that indicates a
fault can be switched off.
– Factory setting: On
– Off
Memory
The tumble dryer saves the settings
that were last selected for a drying
programme (drying level and/or Extras,
or the duration for some programmes).
– Factory setting: Off
– On
Anti-crease
At the end of the programme, the
drum will continue to rotate at intervals
if the laundry is not removed
immediately.
Changing this setting leads to increased
energy consumption.
The setting
can be switched off or
set to a time between 1 and 12 hours.
Factory setting: Off
Further cooling
Before the end of the programme, the
temperature of the dried laundry is
monitored and the cooling phase at
the end of the programme is extended
if necessary.
Changing this setting leads to increased
energy consumption.
– Factory setting: Off
– On
Cooling down temperature
The laundry will be cooled down
automatically before the end of the
programme. The automatic cooling-
down phase which takes place before
the end of a programme can be set at
a cooler level for all programmes. This
means that the cooling phase is
extended.
Changing this setting leads to increased
energy consumption.
The setting can be changed from 40°C–
55°C.
Factory setting: 55°C
