4. Selecting programme settings
32
Selecting Delay start
Delay start must be activated in the
Supervisor level for it to be able to be
selected. In this case, one of these 3
symbols will also light up in the
display:
, ,
.
Normal
Cottons
1:43
h
Touch the sensor with the clock
symbol.
Depending on the Delay start settings in
the Supervisor level, different delays
can be selected in 15-minute
increments:
– The programme finish time:
Finish
at
– The programme start time:
Start at
– The time until the programme starts:
Start in
The maximum Delay start period is 24
hours. The left-hand side of the
display shows what you are able to
enter.
Start at
OK
15
:
2
h
Touch the
or
sensor to select
the hours and/or minutes.
Touch the
OK
sensor.
If the Delay start time is set to
Finish
at
or
Start at
, the current times will be
displayed.
Touch the
OK
sensor.
Delay start begins when you start the
programme.
Changing/cancelling Delay start
Before the programme starts
Touch the sensor with the clock
symbol.
You can change or delete the time.
After the programme has started
Touch the
Start/Stop
sensor.
You can either cancel the programme
or start it straight away.
