Problem solving guide
50
Message
Possible cause and remedy
Clean the filters
lights up after a
certain time at
the end of a
programme.
Please see “Cleaning and care” for notes on
cleaning.
Clean the filters.
Check and clean the air flow area.
To delete the message: Open the fluff filter flap for
at least 10 seconds while the tumble dryer is
switched on.
Clean out the
airways
lights up
at the end of a
programme.
The tumble dryer is not working correctly or
economically. Possible causes could be clogging
caused by fluff or detergent residue.
Clean the filters.
Check and clean the air flow area.
Please see “Cleaning and care” for notes on
cleaning.
To delete the message: Open the fluff filter flap for
at least 10 seconds while the tumble dryer is
switched on.
Clean the fluff filter.
Check the
airways.
lights up
after a
programme has
been cancelled.
You have attempted to dry only a few items of
varying size. A smaller item has been sucked into the
loading area in the door and is clogging the holes in
the laundry deflector.
To delete the message: Touch the
OK
sensor.
Open the tumble dryer door.
Remove the item that is blocking the holes.
Always dry small, individual items together with
larger items.
If you are able to exclude all this, a more major
problem has occurred. See below.
The system is clogged by fluff or detergent residues.
Clean the filters and the airways.
Check the ducting to make sure the drying air can
be extracted without any obstructions.
Please see “Cleaning and care” for notes on
cleaning. Always replace a damaged fluff filter.
To delete the message: Touch the
OK
sensor.
