Miele KWT 2601 SF Operating And Installation Instructions Download

Page: 81 / 92

Frequently Asked Questions

Message

Possible cause and solution

“

F Please contact Miele

Technical Service.

” ap-

pears in the display and
an alarm sounds.

There is a fault.



Make a note of the fault message if necessary.



Contact Technical Service.



To turn the alarm off, touch the



symbol.

The error message does not disappear from the dis-
play until the error has been rectified.

The voltage level is too high/low.



Observe the connection data under “Electrical
connections”.



Contact Technical Service if necessary.



To turn the alarm off, touch the



symbol.

The error message does not disappear from the dis-
play until the error has been rectified.



is shown in the dis-

play. The machine does
not get cold, but the
machine controls are
working.

Demo Mode



is switched on. Demo mode allows the

appliance to be presented in the showroom without
the cooling system being turned on. Do not activate
this setting for domestic use.



Switch off Demo mode



(see “Selecting additional

settings”, section “Switching off

Demo Mode



”).

Summary of Contents for KWT 2601 SF





























































































Search results

Summary of Contents for KWT 2601 SF

Reviews:

Related manuals for KWT 2601 SF

Brands by name

Popular brands

Miele KWT 2601 SF, Operating And Installation Instructions

Search results

Summary of Contents for KWT 2601 SF

Reviews:

Related manuals for KWT 2601 SF

Brands by name

Popular brands