Cleaning and care
75
Appliance front
The appliance front has a special high-
quality finish (Clean Touch Steel). This is
resistant to soiling and is very easy to
clean.
Do not use stainless steel
cleaning agent
on these surfaces,
as it will damage the finish.
Do not use Miele stainless steel
conditioning agent
on these sur-
faces, as it will cause noticeable
smearing.
If soiling is allowed to sit for any
length of time, it may become im-
possible to remove.
Surfaces may be discolored or al-
tered.
It is therefore best to remove soiling
from the appliance front immediately.
All surfaces are easily scratched.
Contact with unsuitable cleaning
agents can alter or discolor the sur-
faces.
See the information on “Cleaning
agents” at the beginning of this sec-
tion.
Clean the surfaces with a clean
sponge and a solution of warm water
and liquid dish soap. A clean, damp
microfiber cloth without cleaning
agent can also be used for cleaning.
After cleaning, wipe with clean water
and dry with a soft cloth.
Cleaning the door seal
Do not use any grease or oil on the
door seal as these will cause the seal
to deteriorate and become porous
over time.
The door seal should be cleaned reg-
ularly with clean water and then
wiped thoroughly dry with a soft
cloth.
Summary of Contents for KWT 2601 SF
