Miele KWT 2601 SF Page 48 Operating And Installation Instructions Download

Page: 48 / 92

Before first use

Allow the wine conditioning unit to
stand for approx. 1 hour prior to con-
necting it to the power supply.
This will help prevent any malfunc-
tions.

Packaging material



Remove all packaging material from
the inside of the wine conditioning
unit.

Leftover tape residue.
Always remove all packaging mate-
rial, including adhesive tape,

before

switching on the wine conditioning
unit.

Cleaning

Please refer to the relevant instruc-
tions in “Cleaning and care”.



Clean the inside of the wine condi-
tioning unit and the accessories.

Choosing the right Door Assistant
(Push2Open/Pull2Open)

The Door Assistant helps you to open
the appliance door.

You can choose between the two Door
Assistants

Push2Open

and

Pull2Open

(see “Switching on

Door Assistant



” in

“Selecting additional settings”).
The default Door Assistant is

Push2Open



Select the

Pull2Open

Door Assistant if your appli-

ance has a cabinet front with a han-
dle.



Select the

Push2Open

Door Assistant if your ap-

pliance has a handle-free cabinet
front.

Summary of Contents for KWT 2601 SF





























































































Search results

Summary of Contents for KWT 2601 SF

Reviews:

Related manuals for KWT 2601 SF

Brands by name

Popular brands

Miele KWT 2601 SF, Operating And Installation Instructions

Search results

Summary of Contents for KWT 2601 SF

Reviews:

Related manuals for KWT 2601 SF

Brands by name

Popular brands