manualshive.com logo in svg

Miele KM 7720 FR, Operating And Installation Instructions

Share
Download
Miele KM 7720 FR Operating And Installation Instructions Download Page 7

IMPORTANT SAFETY INSTRUCTIONS

7

 

To avoid damaging the cooktop, make sure that the connection

data (voltage and frequency) on the data plate correspond to the
building's power supply before connecting the appliance.
When in doubt, consult a qualified electrician.

 

Do not connect the appliance to the electrical supply with a power

bar or extension cord. These are a fire hazard and do not guarantee
the required safety of the appliance.

 

For safety reasons, the cooktop may only be used when it has

been fully installed.

 

This appliance must not be used in a non-stationary location (e.g.

on a ship).

 

Any contact with live connections or tampering with the electrical

or mechanical components of the cooktop will endanger your safety
and may lead to appliance malfunctions.
Do not open the casing of the cooktop under any circumstances.

 

Any repairs not performed by a Miele authorized service techni-

cian will void the warranty.

 

Defective components should be replaced by Miele original parts

only. Only with these parts can safety of the appliance be assured as
intended by the manufacturer.

 

The appliance is not intended for use with an external timer switch

or a remote control system.

 

The cooktop must be connected to the electricity supply by a

qualified electrician (see “Installation – Electrical connection”).

 

If the power cord is damaged, it must only be replaced by a quali-

fied service technician (see “Installation – Electrical connection”).

Summary of Contents for KM 7720 FR

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands