manualshive.com logo in svg

Miele KM 7720 FR, Operating And Installation Instructions

Share
Download
Miele KM 7720 FR Operating And Installation Instructions Download Page 51

Safety features

51

Overheating protection

All the induction coils and the cooling
elements for the electronics are
equipped with an overheating protec-
tion mechanism. Before the induction
coils or cooling elements get too hot,
the overheating protection mechanism
intervenes in one of the following ways:

Induction coils

- Any Booster function in operation will

be turned off.

- The set power level will be reduced.

- The cooking zone turns off automati-

cally. 



 will flash alternately

with 



 in the timer display.

You can use the cooking zones again as
usual when the fault message has gone
out.

Cooling elements

- Any Booster function in operation will

be turned off.

- The set power level will be reduced.

- The cooking zones turn off automati-

cally.

The affected cooking zones can only be
used again if the cooling element has
cooled down to a safe level.

The overheating protection may be acti-
vated under the following circum-
stances:

- The cookware being heated is empty.

- Fat or oil is being heated on a high

power level.

- There is insufficient ventilation to the

underside of the cooktop.

- A hot cooking zone is turned back on

after a power failure.

If, despite removing the cause, the
overheating protection mechanism trig-
gers again, contact Miele Customer
Service.

Summary of Contents for KM 7720 FR

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands