manualshive.com logo in svg

Miele KM 7720 FR, Operating And Installation Instructions

Share
Download
Miele KM 7720 FR Operating And Installation Instructions Download Page 33

How it works

33

Power management system

The cooktop has a maximum total per-
mitted power consumption which can-
not be exceeded for safety reasons.

Cooking zones can be linked together
in pairs on the cooktop. This allows ad-
ditional power to be transferred from
one cooking zone to another.

The values for the maximum total per-
mitted power consumption and which
cooking zones are linked together can
be found in “Overview – Cooking zone
data”.

If power is transferred from one cooking
zone (A) to the other cooking zone (B),
the power for the first cooking zone (A)
is reduced.

If a cooking zone gives power to an-
other zone, this can have the following
effects:

- The power level is reduced.

- Auto heat-up will be deactivated.

Cooking continues at the set level. If
the power is not sufficient, the power
level will be reduced again.

- The Booster function is deactivated.

- The cooking zone is switched off.

When the cooking zone stops transfer-
ring power to the other zone, the power
level can be increased again.

Summary of Contents for KM 7720 FR

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands