manualshive.com logo in svg

Miele KM 7720 FR, Operating And Installation Instructions

Share
Download
Miele KM 7720 FR Operating And Installation Instructions Download Page 59

Frequently Asked Questions

59

Problem

Possible cause and solution



 will flash alternately

with 



, 



, or 



 in

the timer display.

The fan is blocked or defective.

Make sure it has not been blocked by an object.

Remove the obstruction.

If this fault message continues to appear in the
display, contact Miele Customer Service.

In the timer display, E-
digit, e.g., E-0, flashes
alternately with 



, 



,



, 



, 



, 



, 



, or



.

The fan is blocked or defective.

Make sure it has not been blocked by an object.

Remove the obstruction.

If this fault message continues to appear in the
display, contact Miele Customer Service.

A message not listed in
this table is appearing
in the timer display.

There is an electronic fault.

Disconnect the power supply to the cooktop for
approx. 1 minute.

If the problem persists after the power supply has
been restored, please contact Customer Service.

Summary of Contents for KM 7720 FR

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands