manualshive.com logo in svg

Miele KM 7720 FR, Operating And Installation Instructions

Share
Download
Miele KM 7720 FR Operating And Installation Instructions Download Page 25

Before first use

25

Please adhere the extra appliance
data plate (supplied) in the space pro-
vided in the “After sales service” sec-
tion of this manual.

Remove any protective foil and stick-
ers.

Cleaning the cooktop for the
first time

Before first use, wipe down the appli-
ance with a damp cloth and dry it.

Turning on the cooktop for the
first time

Metal components are protected by a
conditioning agent. Smells and vapor
may occur when the appliance is used
for the first time. The heating of the in-
duction coils also causes odors in the
first few hours of operation. With each
subsequent use, the odor is reduced
until it disappears entirely.

The smell and any vapors do not indi-
cate a faulty connection or a defective
appliance and are not harmful to your
health.

Please note that the heat-up time for
induction cooktops is very much
shorter than for conventional cook-
tops.

Summary of Contents for KM 7720 FR

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands