Miele KM 6564 FL, Operating And Installation Instructions

Page: 47 / 72

Problem solving guide
47
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
Problem Cause and remedy
The hob or cooking
zones will not switch
on. There is no power to the hob.
 Check whether the mains fuse has tripped.
Contact an electrician or Miele Service (for the
minimum fuse rating, see data plate).
There may be a technical fault.

Disconnect the appliance from the mains
electricity supply for approx. 1 minute by
– tripping the relevant mains fuse or screwing the
fuse out completely, or
– switching off at the residual current device.

If, after resetting the trip switch in the mains fuse
box or the residual current current device, the
appliance will still not turn on, contact a qualified
electrician or Miele Service.
A smell and vapours are
given off when the new
appliance is being used. The metal components have a protective coating
which when heated for the first time will give off a
slight smell and possibly some vapours. The smell
and any vapours given off do not indicate a faulty
connection or appliance and they are not harmful to
health.
After the hob has been
switched on
 appears
in the timer display for a
few seconds.
The system lock or safety lock is activated.

Deactivate the system lock or safety lock (see
“System lock / Safety lock”).

flashes in the timer
display and the hob
switches off
automatically.
One or more of the sensor controls are covered, e.g.
by finger contact, food boiling over or an object.

Clean off any dirt and/or remove the object (see
“Safety switch-off”).