Miele KM 6564 FL, Operating And Installation Instructions

Page: 40 / 72

Safety features
40
Overheating protection / Pan
protection
Each cooking zone is equipped with
overheating protection (internal
temperature limiter).
The ExtraSpeed cooking zone is also
equipped with a pan protection
mechanism. If you wish to use this
feature, you will need to alter the factory
setting (see “Programming”).
If the overheating protection has
switched on, the heating element
switches on and off even when the
highest power level is selected.
If the pan protection has been
activated, the heating element for the
cooking zone switches off.

will flash
alternately with

on the ExtraSpeed
cooking zone's numerical keybank.
The overheating protection and the pan
protection switch on in the following
situations:
– A pan unsuitable for use with an
induction hob is being used or no
pan is on the cooking zone.
– The pan being used is empty.
– The base of a pan not sitting evenly
on the cooking zone.
– The pan is not conducting heat
properly.
You can tell that the overheating
protection has activated because the
heating element switches on and off
even when the highest power level is
selected.