Miele KM 6564 FL Operating And Installation Instructions Download Page 36

Page: 36 / 72

Additional functions

Wipe protection

The hob sensors can be locked for
20 s in order, for example, to remove
soiling. The



is not locked.

Activating



Touch the



sensor.

The time will count down in the timer
display.

Deactivating



Touch the



sensor until the timer

display goes out.

Demonstration mode

This function enables the hob to be
demonstrated in showrooms without
heating up.

Activating / Deactivating



Switch the hob on.



Touch the 0 sensor control on any of
the numerical keybanks.



Then touch the 0 and 2 sensors at
the same time for 6 seconds.

In the timer display,



flashes

alternately with



(demonstration mode

activated) or



(demonstration mode

deactivated) for a few seconds.

Displaying hob data

The model number and software
version of the hob can be displayed.
There must not be any pots or pans on
the hob.

Model designation



Switch the hob on.



Touch the 0 sensor control on any of
the numerical keybanks.



Then touch the 0 and 4 sensor
controls at the same time.

The timer display shows 2 numbers
flashing alternately:

Example:



flashing alternately with



= KM 1234

Software version



Switch the hob on.



Touch the 0 sensor control on any of
the numerical keybanks.



Then touch the 0 and 3 sensor
controls at the same time.

Numbers appear in the timer display:

Example:

:

= Software version 2.00

Summary of Contents for KM 6564 FL









































































Search results

Summary of Contents for KM 6564 FL

Reviews:

Related manuals for KM 6564 FL

Brands by name

Popular brands

Miele KM 6564 FL, Operating And Installation Instructions

Search results

Summary of Contents for KM 6564 FL

Reviews:

Related manuals for KM 6564 FL

Brands by name

Popular brands