Miele KM 6388 Operating And Installation Instructions Download | Manualshive

Page: 36 / 69

background image

Imp

ort

Ap

plia

nce

s.c

om

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Safety features

35

System lock / Safety lock

The system lock and safety lock are
deactivated if there is an interruption
to the power supply.

Three-finger control is the default set-
ting. You can change the default to
one-finger control (see "Program-
ming").

Your hob is equipped with a system
lock and a safety lock to prevent the
hob and the cooking zones being
switched on or any settings being
altered.

The

system lock

is activated when the

hob is switched off. When it is activ-
ated, the hob cannot be switched on
and the timer cannot be used. The hob
is programmed so that the system lock
must be activated manually. It can be
programmed to be activated automatic-
ally 5 minutes after the hob has been
switched off if the system lock is not
manually activated first (see "Program-
ming").

The

safety lock

is set when the hob is

switched on. When the safety lock is
activated,

– the cooking zone power levels and

the timer settings cannot be
changed.

– the cooking zones, the hob and the

timer can be switched off, but once
switched off cannot be switched on
again.

If a locked sensor is touched when the
safety lock or the system lock is activ-
ated, the indicator light comes on and



appears in the timer display for a few

seconds.

Activating



Touch the



sensor and the



sensor

of both right cooking zones until



the indicator light appears in the timer
display and the safety lock indicator
light comes on.

The indicator light and



go out after

a short while.

Deactivating



Touch the



sensor and the



sensor

of both right cooking zones until the



indicator light goes out in the timer

display and the safety lock indicator
light goes out.

«
...
34
35
36
37
38
...
»

Summary of Contents for KM 6388






































































Reviews:

No comments

Related manuals for KM 6388

Brand: Gaggenau Pages: 4

Brand: Gaggenau Pages: 20

Brand: Gaggenau Pages: 16

Brand: Gaggenau Pages: 36

Brand: Gaggenau Pages: 96

Brand: Gaggenau Pages: 60

Brand: Gaggenau Pages: 4

Brand: Gaggenau Pages: 12

Brand: Gaggenau Pages: 52

Vario 400 Series

Brand: Gaggenau Pages: 40

Brand: Gaggenau Pages: 28

Brand: Gaggenau Pages: 48

Brand: Gaggenau Pages: 52

Brand: U.S. Range Pages: 2

Brand: NEFF Pages: 3

Brand: Parkinson Cowan Pages: 45

Brand: Magic mill Pages: 12

Brand: Gaggenau Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands