Miele KM 6388 Operating And Installation Instructions Download Page 9 | Manualshive

Page: 9 / 69

background image

Imp

ort

Ap

plia

nce

s.c

om

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Warning and Safety instructions

8



Miele can only guarantee the safety of the appliance when genu-

ine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.



The hob is not intended for use with an external timer switch or a

remote control system.



The hob must be connected to the electricity supply by a qualified

electrician (see "Electrical connection").



If the connection cable is damaged, it must be replaced by a suit-

ably qualified electrician with a special connection cable of type H
05 VV-F (pvc insulated). See "Electrical connection".



The hob must be disconnected from the mains electricity supply

during installation, maintenance and repair work. Ensure that power
is not supplied to the appliance until after it has been installed or un-
til any maintenance or repair work has been carried out.



If the hob is fitted with a communication module, in addition to

disconnecting the hob, this module must also be disconnected from
the mains electricity during installation and maintenance of the hob
as well as while any repair work is being carried out.



Danger of electric shock.

Do not use the hob if it is faulty, or if the ceramic surface is cracked,
chipped or damaged in any way. Switch it off immediately, discon-
nect it from the mains electricity supply and contact Miele.



If the hob is installed behind a furniture panel (e.g. a door), ensure

that the door is never closed whilst the hob is in use. Heat and mois-
ture can build up behind a closed furniture panel and cause sub-
sequent damage to the hob, the housing unit and the floor. Do not
close the door until the residual heat indicators have gone out.



In areas which may be subject to infestation by cockroaches or

other vermin, pay particular attention to keeping the appliance and
its surroundings clean at all times. Any damage caused by cock-
roaches or other vermin will not be covered by the warranty.

«
...
7
8
9
10
11
...
»

Summary of Contents for KM 6388






































































Reviews:

No comments

Related manuals for KM 6388

Brand: Quest Engineering Pages: 6

Renaissance RNCT365G

Brand: Dacor Pages: 20

Preference PGM365-1

Brand: Dacor Pages: 16

Preference SGM304

Brand: Dacor Pages: 16

Preference Renaissance RGC304

Brand: Dacor Pages: 16

Preference Renaissance RGC304

Brand: Dacor Pages: 16

Brand: Dacor Pages: 16

Brand: Caliber Pages: 18

Brand: Happiness Pages: 13

1092 Deluxe Induction G5

Brand: Falcon Pages: 32

Brand: M-system Pages: 60

Brand: rollie Pages: 26

Brand: Jenn-Air Pages: 24

Brand: Panlab Pages: 22

Brand: Emax Pages: 12

Brand: Maytag Pages: 3

Brand: Rangemaster Pages: 52

Pro-Range HDPR30 Series

Brand: Dacor Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands