Miele KM 6388 Operating And Installation Instructions Download

Page: 45 / 69

Imp

ort

plia

nce

s.c

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Problem solving guide

Problem

Cause and remedy

After the hob has been
switched on



appears

in the timer display for a
few seconds. The cook-
ing zones do not heat
up.

The hob is in demonstration mode.



Deactivate demo mode (see "Programming").

A cooking zone
switches off automatic-
ally.

It has been operated for too long.



You can use the cooking zone again by switching
it back on (see "Safety switch-off").

A cooking zone or the
whole hob switches off
automatically.

The overheating protection mechanism has been ac-
tivated.



See "Overheating protection".

The Booster has deac-
tivated early automatic-
ally.

The overheating protection mechanism has been ac-
tivated.



See "Overheating protection".

The cooking zone is not
working in the usual
way on the power set-
ting selected.

The overheating protection mechanism has been ac-
tivated.



See "Overheating protection".

Power level 9 is auto-
matically reduced if you
select power level 9 on
two linked cooking
zones at the same time.

Operating both zones at power level 9 would exceed
the permitted maximum power for the two zones.



Use a different cooking zone.

The food in the pan
does not heat up when
the Auto heat-up func-
tion is switched on.

A large amount of food is being heated up.



Start cooking at the highest power level and then
turn down to a lower one manually later on.

The pan is not conducting heat properly.



Use a different pot or pan which conducts heat
properly.

An operating noise can
be heard after the appli-
ance has been switched
off.

The fan will continue running until the appliance has
cooled down. It will then switch itself off automatic-
ally.

Summary of Contents for KM 6388






































































Search results

Summary of Contents for KM 6388

Reviews:

Related manuals for KM 6388

Brands by name

Popular brands

Miele KM 6388, Operating And Installation Instructions

Search results

Summary of Contents for KM 6388

Reviews:

Related manuals for KM 6388

Brands by name

Popular brands