manualshive.com logo in svg

Miele KM 6388, Operating And Installation Instructions

Share
Download
Miele KM 6388 Operating And Installation Instructions Download Page 63

Imp

ort

Ap

plia

nce

s.c

om

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Electrical connection

62

Disconnecting from the mains

Danger of electric shock.

After disconnection, ensure the ap-
pliance cannot be switched back on
by mistake.

To disconnect the appliance from the
mains power supply, do one of the fol-
lowing depending on installation:

Safety fuses

Completely remove fuses

Automatic circuit breakers

Press the (red) button until the middle
(black) button springs out.

Built-in circuit breakers

Circuit breakers, type B or C: switch
the on-off switch from 1 (on) to 0 (off).

Residual current device (RCD)

Switch the main switch from 1 (on) to
0 (off) or press the test button.

Mains connection cable

The hob must be connected to the elec-
trical supply with a special connection
cable, type H 05 VV-F (PVC insulated)
with a suitable diameter.

Please see wiring diagram for connec-
tion. (N.B. This appliance is supplied
single phase only in the UK / AUS / NZ).

See the data plate on the hob for the
correct voltage and frequency.

Replacing the mains cable

Danger of electric shock.

The mains connection cable must be
replaced by a suitably qualified and
competent person in accordance
with current local and national safety
regulations. (e.g. BS 7671 in the UK).
The earth lead must be connected to
the point marked 

.

If the mains cable needs to be replaced
it must be replaced with a special con-
nection cable, type H 05 VV-F (PVC-in-
sulated), available from Miele.

The connection data is quoted on the
data plate.

Summary of Contents for KM 6388






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands