manualshive.com logo in svg

Miele KM 5603, Operating And Installation Instructions

Share
Download
Miele KM 5603 Operating And Installation Instructions Download Page 67

Electrical connection

67

Mains connection cable

The cooktop must be connected to the
electrical supply with a special
connection cable, type H 05 VV-F (PVC
insulated) with a suitable diameter.

Please see the wiring diagram for
connection.

See the data plate on the cooktop for
the correct voltage and frequency.

Replacing the mains
connection cable

Danger of electrical shock!

The mains connection cable must
only be replaced by a suitably
qualified and competent person in
accordance with current local and
national safety regulations.
The earth lead must be connected to
the point marked 

.

If the mains connection cable needs to
be replaced, it must be replaced with a
special connection cable, type H 05 VV-
F (PVC insulated), available from Miele,
in order to avoid a hazard.

The connection data is given on the
data plate.

Wiring diagram

Summary of Contents for KM 5603









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands