manualshive.com logo in svg

Miele KM 5603, Operating And Installation Instructions

Share
Download
Miele KM 5603 Operating And Installation Instructions Download Page 38

Safety features

38

Safety lock / System lock

The system lock and safety lock are
deactivated if there is an interruption
to the power supply.

Your cooktop is equipped with a system
lock and a safety lock to prevent the
cooktop and the cooking zones being
switched on or any settings being
altered.

The 

system lock

 is activated when the

cooktop is switched off. When it is
activated, the cooktop cannot be
switched on and the timer cannot be
used. The cooktop is programmed so
that the system lock must be activated
manually. It can be programmed to be
activated automatically 5 minutes after
the cooktop has been switched off if
the system lock is not manually
activated first (see "Programming").

The 

safety lock

 is set when the

cooktop is switched on. When the
safety lock is activated:

– The power settings for the cooking

zones and the timer settings cannot
be changed.

– The cooking zones, entire cooktop

and the timer can be switched off,
but once switched off cannot be
switched on again.

If an unavailable sensor is touched
whilst the system lock or the safety lock
is activated, 

 will appear in the front left

cooking zone display and 

 will appear

in the front right cooking zone display
after a few seconds.

Cooktops with extended outer zones

Activating

Touch the 

+

 and  

-

 sensors at the

same time until 

 appears in the front

left and 

 appears in the front right

cooking zone display and a tone
sounds.



 will go out after a short while.

Deactivating

Touch the 

+

 and 

-

 sensors at the

same time until 

 goes out from the

front left and 

 goes out from the

front right cooking zone display and a
tone sounds.

Summary of Contents for KM 5603









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands