manualshive.com logo in svg

Miele KM 5603, Operating And Installation Instructions

Share
Download
Miele KM 5603 Operating And Installation Instructions Download Page 64

Flush-fitted cooktops

64

Preparing the worktop

Create the worktop cut-out as shown
in the cooktop and inset diagrams.
Remember to maintain the minimum
safety distances (see "Safety
distances").

Solid wood, tiled and glass worktops:
Fix the wooden frame 

 7 mm below

the top edge of the worktop (see
diagram).

Installing the cooktop

Feed the mains connection cable
down through the cut-out.

Centre the cooktop in the cut-out.

Connect the cooktop to the mains
electricity supply.

Check that the cooktop works.

Seal the remaining gap 

 with a

silicone sealant that is heat-resistant
to at least 160 °C.

Unsuitable sealant can damage
natural stone.
For natural stone worktops and
natural stone tiles, only use silicone
sealant that is specially formulated
for natural stone, and observe the
sealant manufacturer's instructions.
Please follow the manufacturer's
instructions.

Summary of Contents for KM 5603









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands