manualshive.com logo in svg

Miele KM 5603, Operating And Installation Instructions

Share
Download
Miele KM 5603 Operating And Installation Instructions Download Page 46

Problem solving guide

46

With the aid of the following guide, minor problems can be easily corrected
without contacting Miele. If, after reading this guide, you can't remedy the problem
yourself, please call Miele (see back cover for details).
Please note, however, that a call-out charge will be applied to unnecessary service
visits where the problem could have been rectified as described in these operating
instructions.

Danger of injury! Installation, maintenance and repairs may only be carried

out by a suitably qualified and competent person. Repairs and other work by
unqualified persons could be dangerous. Miele cannot be held liable for
unauthorised work. Do not attempt to open the casing of the cooktop yourself.

Problem

Possible cause and remedy

The cooktop or cooking
zones cannot be
switched on.

There is no power to the cooktop.

Check if the circuit breaker has tripped. Contact
an electrician or Miele (for the minimum fuse
rating, see data plate).

There may be a technical fault.

Disconnect the appliance from the electricity
supply for approx. 1 minute. To do this:

– switch off at the wall socket, or switch off at the

isolator, or

– disconnect the mains circuit breaker.

Reset the trip switch in the mains fuse box, and
switch the appliance back on. If it still will not
switch on, contact a qualified electrician or Miele.

A smell and vapours are
given off when the new
appliance is being used.

The metal components have a protective coating
which when heated for the first time will give off a
slight smell and possibly some vapours. The smell
and any vapours given off do not indicate a faulty
connection or appliance and they are not harmful to
health.

After switching on the
cooktop, 

 appears in

the front left cooking
zone display and 

appears in the front
right cooking zone
display for a few
seconds.

The system lock or safety lock is activated.

Deactivate the system lock or safety lock (see
"System lock / Safety lock").

Summary of Contents for KM 5603









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands