manualshive.com logo in svg

Miele KM 5603, Operating And Installation Instructions

Share
Download
Miele KM 5603 Operating And Installation Instructions Download Page 39

Safety features

39

Cooktops without extended outer
zones

Activating

Touch the 

 sensor until 

 appears in

the front left cooking zone display
and 

 appears in the front right

cooking zone display together with
the indicator light for the lock.

The indicator light and 



 go out after

a short while.

Deactivating

Touch the 

 sensor until 



 and the

safety lock indicator light go out.

Safety switch-off

Safety switch-off with an overlong
cooking time

The safety switch-off mechanism is
triggered automatically if one of the
cooking zones is heated for an
unusually long period of time. This
period of time depends on the power
setting selected. Once exceeded, the
cooking zone switches off and the
residual heat indicators appear. The
cooking zone can be operated again
after it has been switched off and back
on.

Safety switch-off if the sensors are
covered

Your cooktop will switch off
automatically if one or several sensors
remain covered for more than about
13 seconds, for example by finger
contact, food boiling over or an object.
An 

 will flash in each of the cooking

zone displays.
Remove the obstruction or clean the
area. 

 will go out and the cooktop will

be ready to use again.

Summary of Contents for KM 5603









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands