manualshive.com logo in svg

Miele KM 5603, Operating And Installation Instructions

Share
Download
Miele KM 5603 Operating And Installation Instructions Download Page 35

Timer

35

The cooktop has to be switched on if
you wish to use the timer.
You can set a time between
1 minute (



) and 9.5 hours (

.

).

The timer can be used for two different
functions:

– to set the minute minder

– to set a cooking zone to switch off

automatically

Use the 

-

 sensor to reduce the time

from 

.

 to 



, and the 

+

 sensor to

increase the time from 



 to 

.

. The

display stops at 

.

 and at 



. To

continue beyond this setting, briefly
remove your finger from the sensor and
then touch it again.
Durations exceeding 99 minutes are set
in half-hour steps. The half hour is
indicated by a dot after the number.

Minute minder

Setting

Touch the 

 sensor.



 and the minute minder indicator light

will flash in the timer display.

Select the time you want with the 

-

 or

+

 sensor.

Changing the minute minder

Touch the 

 sensor.

Select the time you want with the 

-

 or

+

 sensor.

Deleting the minute minder

Touch the 

 sensor.

Touch and hold the 

-

 and 

+

 sensors

at the same time until 



 appears in

the timer display.

Summary of Contents for KM 5603









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands