manualshive.com logo in svg

Miele KM 5603, Operating And Installation Instructions

Share
Download
Miele KM 5603 Operating And Installation Instructions Download Page 58

Cooktops with frame or bevelled edge

58

Installation

Preparing the worktop

Create the worktop cut-out as shown
in the cooktop diagram. Remember
to maintain the minimum safety
distances (see "Safety distances").

Wooden worktops

Seal the cut surfaces with a suitable
heat-resistant sealant to avoid
swelling caused by moisture. The
sealant must be temperature-
resistant.

Make sure the sealant does not
come into contact with the top
surface of the worktop.

The sealing strip ensures that the
cooktop will sit securely in the cut-out
without slipping. Any gap between the
trim and worktop will become smaller
over time.

Securing the spring clamps/support
brackets

The exact positioning of the spring
clamps and the support brackets (only
for cooktop with bevelled edges) is
shown in the individual cooktop
diagrams.

Wooden worktops

Position the spring clamps 

 and the

support brackets 

 on or at the top

edge of the cut-out as shown in the
cooktop diagram.

The support brackets are only required
for cooktops with bevelled edges.

Secure the spring clamps 

 and the

support brackets 

 with the

3.5 x 25 mm wood screws supplied.

Summary of Contents for KM 5603









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands