Miele KFNS 37692 iDE-1 Operating And Installation Instructions Download Page 64

Page: 64 / 120

Cleaning and care

Setting the cleaning position

This setting can only be selected if the
ice cube maker is on.



Empty the ice cube drawer.



Touch the settings button.

All symbols available for selection will
appear on the display and the



symbol will flash.



Touch the buttons for setting the
temperature (



and



) repeatedly

until the symbol for the ice cube
maker



flashes on the display.



Touch the OK button to confirm your
selection.



By touching the



and



buttons,

you can now select the setting you
want:

: The ice cube maker is switched off

: The ice cube maker is switched on

: Set the water volume

Select the ice cube tray cleaning

position

: Rinse the ice cube maker



Touch the OK button to confirm your
selection.

The selected setting is saved and you
will hear the ice cube tray moving into a
slanted position.



Wait until the ice cube tray has
stopped moving before continuing.

The ice cube maker will then switch off.
The symbol for the ice cube maker



will disappear from the display.



Remove the ice cube drawer.

The ice cube tray cannot be removed
and must be cleaned in place.



Clean the ice cube tray



and the ice

cube drawer with lukewarm water
and liquid dish soap. Wipe thoroughly
with clean water and dry with a cloth.

As soon as the ice cube maker is
switched on, the ice cube tray rotates
back to its original position.

Summary of Contents for KFNS 37692 iDE-1

























































































































Search results

Summary of Contents for KFNS 37692 iDE-1

Reviews:

Related manuals for KFNS 37692 iDE-1

Brands by name

Popular brands

Miele KFNS 37692 iDE-1, Operating And Installation Instructions

Search results

Summary of Contents for KFNS 37692 iDE-1

Reviews:

Related manuals for KFNS 37692 iDE-1

Brands by name

Popular brands