Installation
*INSTALLATION*
107
To give the appliance additional
security
in the niche, push the rods
supplied between the appliance and the
cabinet base:
First secure the handle
to one of
the stabilizing rods
.
Use the handle to push the stabilizing
rod
into the guide as far as it will
go. Remove the handle
and fit it to
the other stabilizing rod supplied and
push this into its guide as far as it will
go.
Tip:
Keep the handle somewhere safe
in case you ever need to fit the
appliance into a new housing unit.
Close the appliance doors.
Fitting the cabinet doors
An installation set or an extra pair of
securing brackets is available from
Miele Customer Service or from
specialist retailers for the installation
of large or divided cabinet doors.
Complete the following steps on both
doors.
The distance between the appliance
door and the mounting frame is set to
5/16" (8 mm) at the factory. Check
this distance and adjust it if
necessary.
Push the installation aids
to the
height of the cabinet door. The lower
contact edge X of the installation aids
must be at the same height as the
upper edge of the cabinet door to be
installed (
symbol).
Summary of Contents for KFNS 37692 iDE-1
Page 118: ......
