Installation
*INSTALLATION*
105
Important for cabinetry with door
fittings (such as stubs and seals).
Take the dimensions of the fittings
into account.
Check to make sure there is a gap all
round of
1 5/8" (42 mm)
to the front
edges of the door fittings.
Pull the appliance forward by the
appropriate dimension.
Tip:
If possible, remove the door fittings
and push the appliance into the niche
until all securing brackets at the top and
bottom are touching the front edge of
the cabinet side wall.
Align the appliance on both sides via
the adjustable feet so that it stands
upright.
Securing the appliance in the niche
Push the appliance onto the cabinet
wall on the hinge side.
Screw the particleboard screws
through the hinge plates in the order
shown to secure the appliance to the
cabinetry.
Summary of Contents for KFNS 37692 iDE-1
Page 118: ......
