Miele KFN 9855 iDE Page 35 Operating And Installation Instructions Download

Page: 35 / 96

Adjusting the door shelf /
bottle shelf

Lift the hanging container up and out
of the stainless steel support frame.

Push the stainless steel support
frame up and remove it by pulling it
forward.

Replace the stainless steel support
frame at the desired location. Make
sure that it is securely pushed back
into position.

Place the hanging container into the
stainless steel frame.

The hanging containers can be
removed for loading and unloading and
then replaced.
The hanging containers with the food
can be placed directly on the table for
serving.

Adjusting the bottle divider

The bottle divider can be moved to the
left or right. This holds the bottles more
securely in position when the door is
opened and closed.

The bottle divider can be removed
completely (e.g. for cleaning):

Slide the front edge of the bottle
divider up and lift the bottle divider
out.

Arranging the Interior - Refrigerator Section

Summary of Contents for KFN 9855 iDE

































































































Search results

Summary of Contents for KFN 9855 iDE

Reviews:

Related manuals for KFN 9855 iDE

Brands by name

Popular brands

Miele KFN 9855 iDE, Operating And Installation Instructions

Search results

Summary of Contents for KFN 9855 iDE

Reviews:

Related manuals for KFN 9855 iDE

Brands by name

Popular brands