Miele KFN 9855 iDE Page 28 Operating And Installation Instructions Download

Page: 28 / 96

Touch the Super button again to
confirm your selection.

appears in the control panel when

the safety lock is activated.

To leave the settings mode, touch the
button for switching the freezer
section on and off.

Temperature unit (Fahrenheit
or Celsius)

The temperature can be displayed in
Celsius (°C) or Fahrenheit (°F).

The factory default is Fahrenheit.

Selecting the temperature unit

Touch the button for switching Super
Freeze on and off for 5 seconds.

The Super Freeze indicator

to the

right of the display is on during this
time, and after 5 seconds

flashes in

the lower temperature display (freezer
section). The display shows MENU. You
are now in the settings mode.

Tap the button for setting the
temperature in the freezer section
until a flashing

appears in the lower

temperature display.

Touch the Super button again.

The following will appear in the display:

–

§ C

(Temperature display in Celsius),

–

§ F

(Temperature display in

Fahrenheit).

Touch the Super button again to
confirm your selection.

The temperature is now displayed in
the selected unit.

To leave the settings mode, touch the
button for switching the freezer
section on and off.

Additional Settings

Summary of Contents for KFN 9855 iDE

































































































Search results

Summary of Contents for KFN 9855 iDE

Reviews:

Related manuals for KFN 9855 iDE

Brands by name

Popular brands

Miele KFN 9855 iDE, Operating And Installation Instructions

Search results

Summary of Contents for KFN 9855 iDE

Reviews:

Related manuals for KFN 9855 iDE

Brands by name

Popular brands