Installation of the anti-tipping bracket
in a cabinet of more than 25" depth.
The anti-tipping bracket assures proper
functioning up to a cabinet depth of 24
- 25 inches.. If the cabinet is deeper
than 25", a wooden spacer is required
between the back wall of the niche and
the appliance.
The spacer must be securely affixed
to the floor.
Position of the spacer in a normal
cabinet
Position of the spacer in a frameless
cabinet
The anti-tipping bracket must be
level after installation even if the floor
is not level. Install the wooden
spacer in an appropriate position.
Fastening the covers
Install the adhesive covers above,
between and under the mounting plates
on the sides of the appliance.
^
Cut the covers to the required length
(see illustration).
^
Fasten the covers keeping a 1/4"
(6mm) clearance from the mounting
plates.
Installing the Appliance
79
Summary of Contents for KFN 9855 iDE
Page 64: ...64 ...
Page 95: ...95 ...
Page 96: ...Subject to change without notice 1913 KFN 9855 iDE M Nr 09 634 400 00 ...
