Miele KFN 9855 iDE Page 59 Operating And Installation Instructions Download

Page: 59 / 96

Problems with the ice cube maker

Problem

Possible cause

Solution

You cannot switch
the ice cube maker
on.

The appliance is not
connected to the power
supply or is not turned on.

Plug in the power cord
and turn the appliance on.

The ice cube maker
does not produce
any ice cubes.

The appliance or the ice
cube maker is not turned
on.

Turn the appliance and
the ice cube maker on.

The water supply line is not
open.

Open the water supply.

The upper freezer drawer is
not closed properly or the
ice cube container is not
properly inserted in the
drawer.

Check the position of the
ice cube container.

Push the drawer all the
way in.

The ice cube tray is not
positioned correctly.

Correct the position of the
ice cube tray (see
"Cleaning and care -
Setting the ice cube
maker to the vacation
state for cleaning").

The temperature in the
freezer section is too high.

Select a lower
temperature.

Problem Solving Guide

Summary of Contents for KFN 9855 iDE

































































































Search results

Summary of Contents for KFN 9855 iDE

Reviews:

Related manuals for KFN 9855 iDE

Brands by name

Popular brands

Miele KFN 9855 iDE, Operating And Installation Instructions

Search results

Summary of Contents for KFN 9855 iDE

Reviews:

Related manuals for KFN 9855 iDE

Brands by name

Popular brands