Miele KFN 14943 SD ed Operating And Installation Instructions Download | Manualshive

Page: 7 / 64

background image

This appliance complies with all
applicable safety laws and
regulations. However, improper use
can result in personal injury and
material damage.

Read the operating instructions
carefully before operating the
appliance for the first time. They
contain important information on the
installation, safety, operation and
care of your appliance. This will
avoid the risk of personal injury and
damage to the appliance.

Keep the operating instructions in a
safe place and pass them on to any
future owner!

Correct use

~

This appliance is intended for

domestic use only, specifically for the
cool storage of food and drinks, for
storing frozen food, for freezing fresh
food and for making ice.
Any other use is not permitted and
could be dangerous. The manufacturer
will not be held liable for damage
caused by incorrect use or operation.

~

Persons incapable of using the

appliance safely owing to their
physical, sensory or mental capabilities
or their inexperience or lack of
knowledge must not use this appliance
without supervision or instruction by a
responsible person.

Safety with children

~

Children may use the appliance

without supervision only if its operation
has been clearly explained to them and
they are able to use it safely. They must
be able to recognize the potential
hazards of improper operation.

~

Supervise any children in the vicinity

of the appliance. Do not allow children
to play with the appliance or to swing
on the door, for example.

Warning and Safety Instructions

7

«
...
5
6
7
8
9
...
»

Summary of Contents for KFN 14943 SD ed

































































Reviews:

No comments

Related manuals for KFN 14943 SD ed

Brand: Thermador Pages: 96

Brand: BOMANN Pages: 32

Brand: Hanseatic Pages: 64

ARCTIS 85220 GA

Brand: AEG Pages: 64

Brand: AEG Pages: 76

Brand: Whirlpool Pages: 1

Brand: Whirlpool Pages: 2

Brand: Whirlpool Pages: 9

Brand: Whirlpool Pages: 32

Brand: Bonnet Pages: 22

BIOTRONIC TURBO MI 10

Brand: Bonnet Pages: 38

Brand: Homa Pages: 5

Brand: ZANKER Pages: 19

Brand: inventum Pages: 56

Brand: inventum Pages: 56

CV850S/9 (TT 120 F)

Brand: CORBERO Pages: 18

KANDER KRMFR101

Brand: KRONA Pages: 54

Brand: Qilive Pages: 144

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands