^
Remove the cover
d
.
Now the soft-close mechanism and the
appliance are no longer connected.
^
Remove the panel
a
.
^
Push the shock absorber arm
f
as
far as possible towards the handle
side.
^
Loosen the three screws
g
on the
soft-close mechanism and the
spacer.
^
In the middle, pry out the housing
with the soft-close mechanism using
a flathead screwdriver.
^
Then, pry the housing with the
soft-close mechanism out of the
retainer from the appliance side.
^
Lay the soft-close mechanism aside.
^
Push out the spacer towards the
hinge side.
^
Lay the spacer aside.
Removing the top door of the
appliance:
^
Loosen the cover
h
by carefully
sliding a flathead screwdriver from
below into the recess.
^
Remove the cover
h
together with
the mounting bracket
i
.
^
Loosen the mounting bracket
i
from
the cover
h
by pushing it slightly to
the left and then removing the cover
plate towards the front.
^
Turn the mounting bracket
i
180°.
^
Place the cover
h
onto the front of
the mounting bracket
i
and push it
to the right. The writing must be
visible.
^
Unscrew the bearing
j
mechanism,
turn it 180° and replace it on the
opposite side. If necessary,
pre-punch the screw holes.
^
Remove the top cover
k
by pushing
it from back to front and lifting it up.
^
Remove the cover
l
upwards.
Changing the door hinging
51
Summary of Contents for KFN 14943 SD ed
