Miele KFN 14943 SD ed Operating And Installation Instructions Download

Page: 20 / 64

Changing the brightness of the
temperature display

You can adjust the brightness of the
temperature display to suit the lighting
conditions of the room.

Touch the

button and keep your

finger on the button.

Now tap once on the ON/OFF button
(WITHOUT releasing the

button!).

Keep the finger on the

button for

another 5 seconds until

displayed.

Again tap the

button until

displayed.

Tap the ON/OFF button to confirm.

By tapping the

button you can now

change the brightness of the
temperature display:

d 0

: maximum brightness

d 1

: reduced brightness

–: return to menu.

The old setting is displayed steady, the
setting to be selected flashes.

Whenever you finish changing a
setting, tap the ON/OFF button to
confirm.

Keep tapping the

button until

displayed.

Tap the ON/OFF button.

You have left the settings mode.

The correct temperature

Summary of Contents for KFN 14943 SD ed

































































Search results

Summary of Contents for KFN 14943 SD ed

Reviews:

Related manuals for KFN 14943 SD ed

Brands by name

Popular brands

Miele KFN 14943 SD ed, Operating And Installation Instructions

Search results

Summary of Contents for KFN 14943 SD ed

Reviews:

Related manuals for KFN 14943 SD ed

Brands by name

Popular brands