Miele KFN 14943 SD ed, Operating And Installation Instructions

Page: 38 / 64

The prompt to change the active
charcoal filter will occur approx. every 6
months.
When the display for an active charcoal
filter change lights up red, the active
charcoal filters must be changed.
Replacing the active charcoal
filters
^
Pull the retainer for the active
charcoal filters up and off the shelf.
^
Remove the two active charcoal
filters and insert the new filters into
the retainer with the encircling edge
down.
^
Place the retainer in the middle of the
rear limit stop of any shelf so that it
engages.
To confirm the filter change,
^
touch the display for an active
charcoal filter change for approx. 2
seconds.
The display for an active charcoal filter
change goes out and the timer is reset.
Changing the active charcoal filters
at a later date
If you do not have any new active
charcoal filters, you can order new
ones from your Miele dealer. You can
change the active charcoal filters at a
later date.
If you are bothered by the red active
charcoal filter change display, you can
turn it off:
^
touch the display for an active
charcoal filter change for approx. 2
seconds.
The active charcoal filter change
display goes out.
Active charcoal filter
38