The appliance is equipped with an
alarm system to ensure that the
temperature in the freezer section does
not rise unnoticed and to avoid energy
being wasted if the door is left open.
Switching the alarm system
ON
The alarm system is always active. It
does not need to be switched on
manually.
Temperature alarm
If the temperature in the freezer section
becomes too warm, an alarm will
sound.
The alarm off button flashes red and the
Freezer symbol flashes.
The audible and visible signals are
triggered under the following
conditions, for example:
– whenever too much warm air flows
into the appliance, for example when
food is being loaded, re-arranged or
taken out.
– whenever large amounts of food are
being frozen at once.
– after a power outage.
Once the the alarm condition has
ended, the alarm stops and the
displays go out.
Switching the alarm off early
If the alarm signal bothers you, it can
be silenced.
^
Tap the alarm off button.
The alarm will stop.
The alarm off button and the Freezer
symbol will continue to flash until the
alarm condition has ended.
If the temperature was above 0°F
(-18°C) for a longer period of time
you will need to check to make sure
that no frozen food started to thaw.
Any food that started to thaw must
be used as soon as possible!
Alarm
21
Summary of Contents for KFN 14943 SD ed
