^
Lift the plugs
l
out of the door
bearing bushing in the appliance
door and place it on the other side.
Mounting the bottom door of the
appliance:
^
Remove the cover
a
towards the
front.
^
Pull the cover
b
off.
^
Screw the adjustment foot at the
bearing pin
c
completely in.
^
With the assistance of another person,
carefully tilt the appliance backwards
and pull the bearing pin
c
down and
out.
^
Pay attention to the hinge bushing
d
.
^
Loosen the screws
e
and remove the
hinge bracket
f
.
^
Remove the cover
g
and loosen the
screw. Attach both to the other side.
^
Screw the hinge bracket
f
onto the
other side with the two
outer
screws.
Do not use the
middle
screw; this
allows later alignment of the appliance
door using the outer, elongated holes!
^
Unscrew the bearing part
h
from the
hinge bracket
f
, turn it 180° and
screw it into the opposite hole of the
hinge bracket.
^
Now place the cover
b
on the other
side.
^
With the assistance of another
person, carefully tilt the appliance
backwards and insert the bearing pin
c
into the hinge bracket
f
from
below. The groove in the bottom of
the hinge bracket faces forwards.
^
Place the hinge bushing
d
onto the
bearing pin
c
.
^
Put the cover
a
on.
^
Place the lower door of the appliance
onto the bearing pin
c
from above.
^
Close the bottom door of the
appliance.
Changing the door hinging
54
Summary of Contents for KFN 14943 SD ed
